Robot #6

Not started yet
PuppyPi In 13 Aug 2026 47 days in shop

No reported fault recorded.

  1. 1 Power gate 1
  2. 2 Wi-Fi link gate 2
  3. 3 Bus roll-call gate 3
  4. 4 Joint health gate 4
  5. 5 Calibration gate 5
  6. 6 Repair gate 6

Joints & deviation — top view

FLFRRLRR12345678S+−12S+−34−+S65−+S87TOP VIEW · LEGS SPREAD
Works 0 Faulty 0 Untested 8 of 8

8 joints, seen from above with the legs spread. Numbers are servo IDs and are still assumed rather than read off the robot.

Handle control

tested, working
L2head downL1head upR2lean backR1lean forwardD-padforward, back,left, rightYXBAYstand upAstand downX and B do nothingSTARTback to start poseONLeft stick does the same as the D-padRight stick does nothing on this handleTESTED. ONLY THE RIGHT STICK, X AND B DO NOTHING. NO FAULT IN THE HANDLE.

Needs the handle, its USB receiver and 2 AAA batteries. Put the receiver in before powering the robot on, otherwise it will not pair. Switch the handle on, both lights flash, green and steady means paired. It sleeps after 30 seconds unpaired or 5 minutes idle, and START wakes it. This map is what was tested, not what the manual says. Hiwonder put body height on the right stick. On this handle the right stick is dead and height sits on Y and A.

Observations

my working notes

Nothing recorded yet.